Product ID:RP 3209-1 HARDENER
MSDS Date:12/01/1986
FSC:8030
NIIN:00F040577
Kit Part:Y
MSDS Number: BXLYH

CIBA GEIGY CORP PLASTICS & ADDITIVES

THREE SKYLINE DRIVE
HAWTHORNE, NY 10532-2119
US

Emergency Phone: 800-888-8372/914-347-4700

Info Phone: 800-888-8372/914-347-4700

Preparer: PETER HENIGE

Cage: EO945

CIBA-GEIGY CORP ADDITIVES DIV.

HAWTHORNE, NY 10532-2119 US

Telephone: 800-888-8372

Cage: 07566

TRIETHYLENETETRAMINE, EPOXY HARDNER

CAS: 112-24-3

RTECS: YE6650000

MENTHANE DIAMINE, CYCLOHEXANEMETHANAMINE, 4-AMINO-ALPHA,

CAS: 80-52-4

RTECS: OS8925000

POLYAMIDE OF C18 FATTY ACID PRIMERS & TETA; POLYAMIDE RESIN

CAS: 68410-23-1

TRIETHYLENE TETRAMINE POLYMER W/METHYL OXIRANE *95-2*

CAS: 26950-63-0

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:SKIN: CORROSIVE. CAUSES BURNS. EYES:
REGARD AS CORROSIVE. SENSITIZATION POSSIBLE IN SUSCEPTIBLE
INDIVIDUALS. OVEREXPOSURE CAUSES SKIN/EYE BURNS. MAY CAUSE ALLERGIC
SKIN REACTIONS. SKIN ABSORPTION. MAY CAUSE OTHER SIGNS OF ILLNESS.
HEATED PRODUCT MAY PRODUCE INHALABLE VAPORS.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:BURNS, NAUSEA, VOMITING
Medical Cond Aggravated by Exposure:SKIN & EYE CONDITIONS.

First Aid:EYES: IMMEDIATELY FLUSH W/WATER FOR 15 MINS. SKIN: WASH
W/SOAP & WATER. INGESTION: IF CONSCIOUS, GIVE PLENTY OF WATER TO
DRINK. DON'T INDUCE VOMITING. INHALATION: REMOVE TO FRESH AIR. GIVE
OXYGEN/CPR IF NEEDED. OBTAIN MEDICAL ATTENTION IN ALL CASES.

Flash Point Method:PMCC
Flash Point:248F
Extinguishing Media:CO2, DRY CHEMICAL, FOAM, WATER
Fire Fighting Procedures:USE SELF CONTAINED BREATHING APPARATUS.
Unusual Fire/Explosion Hazard:CORROSIVE. DECOMPOSITION & COMBUSTION
PRODUCTS MAY BE TOXIC.

Spill Release Procedures:REMOVE BY ABSORBING IN ABSORBENT MATERIAL.
AVOID CONTACT.

Handling and Storage Precautions:KEEP CONTAINER CLOSED. USE W/ADEQUATE
VENTILATION.
Other Precautions:DON'T GET IN EYES, ON SKIN, ON CLOTHING. AVOID
BREATHING VAPOR/MIST. NUISANCE DUST MAY BE GENERATED WHEN
SANDING/SAWING CURED MATERIAL.

Respiratory Protection:USE NIOSH APPROVED ORGANIC VAPOR CARTRIDGE
RESPIRATOR WHEN VAPOR/MIST EXPOSURE IS LIKELY.
Ventilation:MECHANICAL (GENERAL) & LOCAL EXHAUST IAW/ACGIH
RECOMMENDATIONS.
Protective Gloves:IMPERMEABLE
Eye Protection:FULL FACE SHIELD
Work Hygienic Practices:REMOVE/LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE. WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:>285F
Vapor Pres:0.8
Spec Gravity:0.97-0.99
Solubility in Water:SLIGHT
Appearance and Odor:CLEAR AMBER LIQUID, W/AMMONIA LIKE ODOR
Percent Volatiles by Volume:<1

Stability Indicator/Materials to Avoid:YES
OXIDIZING ACIDS, LEWIS ACIDS, METAL ORGANICS, NATURAL RUBBER
Stability Condition to Avoid:EXCESSIVE HEAT FOR PROLONGED PERIODS OF
TIME.
Hazardous Decomposition Products:CO2, CO

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE &
FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.